Friday, March 29, 2013

Pocket : How to save the AV receiver

Pocket : How to save the AV receiver


How to save the AV receiver

AV receivers need to be completely reinvented before everyone gives up on them.Photo by: ( Sarah Tew/CNET)
There are a lot of reasons why sound bars are taking over home audio, but one of them is increasingly obvious: AV receivers are terrible.
I've reviewed a lot of them for CNET, and while receivers are fine for enthusiasts that know what they're doing, they're a frustrating experience for everyone else. Most technology gets better over time, but AV receivers seem frozen in amber, with giant chassis, thick inscrutable manuals, and onscreen interfaces that could only generously be called "standard definition". They're embarrassingly backwards compared to the rest of your home theater gear, yet they remain a begrudging necessity for those who want something better than a sound bar.
AV receivers don't have to be this bad, but they need to completely reinvent themselves to stay relevant. Here's where they should start.

1. Make them smaller

While every other device gets slimmer and more compact, AV receivers look the same as they did ten years ago. They're massive, unwieldy machines that require tons of shelf space and are a pain to deal with.
Yamaha RX-V475 (left) vs. Marantz NR1603 (right)
But we already know they don't need to be so bulky. Marantz has been making handsome,slimline receivers for several years now, that sound great and offer plenty of features. The current "default" design that gets used seems more out of habit (or laziness) rather than any technical limitations.

2. Make them prettier

Even if AV receiver companies can't (or won't) make the boxes any smaller, they could at least put some effort into making them look nice. For some reason, all the major companies have decided that a giant, black box is the best look for AV receivers.
Peachtree Audio decco65Photo by: ( Sarah Tew/CNET)
There's no reason an amplifier needs to be so aggressively unsightly. Take Peachtree Audio's decco65, which actually looks like something you'd actually want in your living room, rather than an eyesore you put up with. Granted, the decco65 ($1,100) is considerably more expensive than your typical midrange AV receiver, but there's a workable middle ground between gorgeous curved rosewood and a huge block of black metal.

3. Get rid of most features

AV receivers are one of the worst sufferers of featuritis. Features keep getting added because they look good on comparison charts, but we end up with receivers that can do everything, but nothing very well.
First to go should be built-in streaming media features. AV receivers make poor media streamers, with sluggish navigation, lousy user interfaces and rarely updated firmware. You're much better off connecting a $100 Roku 3 or Apple TV box for your streaming needs.
Next, cut back on all the unnecessary licensing and sound processing. Dolby ProLogic IIz -- which adds two "height speakers" to a standard 5.1 or 7.1 surround setup -- just isn't worth the hassle. THX certification isn't required for great sound. Nobody uses cheesy "Jazz Club" or "Concert Hall" modes on their AV receiver. These features and logos keep sticking around, despite the fact that no one really seems to want them.
Some people need all these ports, but you probably don't.Photo by: ( Sony)
Finally, the most radical step is to cut the niche features that are useful in some cases, but I'd bet go unused for the vast majority of buyers. The list is long: analog video upconversion, AM/FM radio tuners, component/composite video inputs, 7.1 channels, and multi-zone audio. There's still a place for high-end receivers with the "kitchen sink" approach, but it's frustrating that mainstream receivers include so much cruft that buyers don't need.
Strip away all those features and your AV receiver would do two simple things: amplify your speakers and switch between your source devices. And that's exactly what I use my AV receiver for.

4. Embrace wireless

For all the useless features AV receivers have, they shockingly lack basic wireless connectivity that would actually be useful: Wi-Fi and Bluetooth. Wi-Fi lets you update the firmware and control the receiver via mobile devices, while Bluetooth is the easiest way to wirelessly stream audio from your smartphone or tablet. For many people, mobile devices are the center of their digital music experience, so it's crazy that most AV receivers don't support Wi-Fi and Bluetooth natively.
$130 for a Wi-Fi adapter? No thanks.Photo by: ( Pioneer)
Even worse, the companies have the gall to try and soak you for accessories that add these features after you've already spent hundreds of dollars on a receiver. Look at prices for these wireless adapters that should have been included in the first place:
The lone standout is Onkyo, which reasonably prices its Wi-Fi and Bluetooth adapters at $30and $50, respectively. And at least both Onkyo and Sony seem to have gotten the message and have recently included built-in Bluetooth and Wi-Fi on some of their receivers.

5. Include a true high-definition interface

If you fire up your brand new $400 Pioneer VSX-823-K receiver for the first time to set it up, this will be the first screen you're greeted with:
Pioneer VSX-823-K's onscreen displayPhoto by: ( Matthew Moskovciak/CNET)
How is that still acceptable? No other modern home theater device looks anything like that. Even the $50 Roku LT has an colorful, high-def interface. Granted, you don't use the onscreen interface of an AV receiver that often, but it's a bad experience right out-of-the-box to be immediately confronted with blocky text that harkens back to the MS-DOS days.

6. Make a usable remote

AV receiver remotes range from truly awful to barely acceptable. They're typically filled with tiny buttons, confusingly labeled, with a haphazard layout that isn't natural to navigate.
Take the remote included on the Yamaha RX-V475. To start, there's two different power buttons at the top -- bad start already. That's followed by grid of small, numbered buttons. If the "1" button is in the HDMI section, it selects the "HDMI 1" input... and you have to remember which device that is. There's also two "star" buttons, but no one could reasonably know what they stand for without diving into the manual. ("Change the external device to be controlled without switching the input source.") And that's just the top third of one company's clicker.
There worst part is so many of these buttons are unnecessary. I've never needed a numpad on my receiver's remote. Different sound modes like "movie" and "music" generally do more harm than good, and they could be toggled using an onscreen interface. The bottom line is AV receiver remotes need to be a lot simpler if they don't want to be completely intimidating to anyone who's not a home theater enthusiast.

7. Include speaker cables in the box

AV receiver manuals are thick, labyrinthine affairs, but they all gloss over one of the most basic steps in connecting your speakers: terminating speaker wire. They operate on the laughable, built-in assumption that every buyer knows how to use a crimping tool and banana plugs, which is out-of-step in a world dominated by dead-simple connectors like HDMI and USB.
Onkyo's TX-NR626 user manual casually asks you to strip the insulation from speaker wire, as if everyone knows how to do that.
The solution doesn't seem that hard: include speaker wire in the box that's already pre-terminated with banana plugs (or pins), at least for the front speakers. Companies would need to do some market research to figure out a length that would work in the majority of setups, but there's not that much variation for front speakers. This would add some cost, but it would make the experience much less intimidating for those new to home audio.

8. Embrace stereo

If you want new AV receiver with basic features like HDMI connectivity, you're pretty much forced to buy a 5.1 or 7.1 AV receiver, even if you intend to go with a two-channel setup. Manufacturers just don't offer stereo AV receivers with modern features, which means many buyers are pushed to pay for a bunch of additional channels they'll never use.
Most stereo receivers lack HDMI and other modern features.
AV receivers should embrace a return to stereo as the best defense against the rise of sound bars. A basic stereo system is only slightly more complicated than a sound bar, but it offers much better sound, especially for music.
More importantly, a return to stereo fixes so many of the problems plaguing current models. Scaling back to two-channels of amplification, versus five or seven, means receivers can be smaller. Stereo also eliminates a lot of the need for extra features like automatic speaker calibration and additional surround sound licensing.
That doesn't mean multichannel receivers should go away, but there should simpler, but modern, stereo options for those that don't want to deal with surround sound.

The future is already here, sort of: integrated amps

A lot of these fixes seem obvious and simple, but I'm doubtful there will be any changes to the ossified AV receiver market anytime soon.
But if there is a ray of home audio hope, it's the handful of compact integrated amplifiers with digital inputs that have trickled out over the last few years. These small amps are limited to stereo, but that allows them to be dramatically smaller than a full-size AV receiver. They also tend to be light on inputs, but, as sound bars have proven, you really only need a single digital input if you use your TV to switch between devices.
Teac's A-H01 integrated amplifierPhoto by: ( Sarah Tew/CNET)
Compact integrated amplifiers aren't the right choice for everyone, but for many buyers they're a much better -- and simpler -- solution than a full-size AV receiver. In addition to many new 2013 AV receivers, CNET will be reviewing several small integrated amps over the next few weeks. The result, we hope, will be one or more recommendable products aimed at buyers that want something better than a sound bar without the bulk and frustration of an AV receiver.

1 comment:

  1. What a great piece of content. I assume that you have spent hours writing
    it. Thanks for sharing these ideas with us. best speakers under

    ReplyDelete